Congratulations! We are happy to announce that part number DMC50-1 with NSN 5985004195177 is now available in stock. It is listed as Antenna with CAGE code 00752 and FSC 5985 Antennas Waveguides and Related Equipment is manufactured by Edo Corporation. Are you interested in getting a quick quote for this part?
You are just a few steps away from getting the most competitive quote for this part. To request an instant quote, please completely fill out the form. The fields marked with an asterisk (*) are required as the data entered in these fields will help us in getting you the best possible quote. After filling out the Need Parts By and Quantity (ea) fields, click submit. It takes us 15 minutes or less to analyze your requirements and get back with a competitive quote.
| Part Number: DMC50-1 | Item Name: Antenna | NSN: 5985-00-419-5177 (5985004195177) | NIIN : 004195177 |
| CAGE Code: 00752 | FSC: FSC 5985 Antennas Waveguides and Related Equipment | Manufacturer: Edo Corporation | |
Note : We will not share your information to any third parties.
Unlimited Purchasing is owned and operated by ASAP Semiconductor, which is one of the leading supplier of Edo Corporation hard-to-find aircraft and aviation parts. We have huge inventory with more than 10 million national stock numbers from over 26 different federal supply codes. We have parts manufactured by more than 5000 leading manufacturers. Already, we have sold more than 100 million parts.
There is a label on the national stock number (NSN) part, which indicates procurement, storage, stocking, and issuance from the federal supply system. These parts play an important role in the military and defense logistics supply chain.
To know more about this NSN part DMC50-1, please call us at +1-714-705-4780 or send us your Bill of Materials (BOM) via email at sales@unlimitedpurchasing.com.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5985-00-419-5177 Item Description: Antenna | 5985 | 004195177 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Dmc50-1 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 10.875 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.417 FEET NOMINAL |
| ABMK | OVERALL WIDTH | 2.780 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.257 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 12 |
| ACZB | FREQUENCY RATING | 116.000 MEGAHERTZ MINIMUM SINGLE ANTENNA ELEMENT AND 156.000 MEGAHERTZ MAXIMUM SINGLE ANTENNA ELEMENT |
| AEJN | DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 1.280 INCHES NOMINAL AND 1.640 INCHES NOMINAL AND 1.560 INCHES NOMINAL AND 1.840 INCHES NOMINAL AND 3.000 INCHES NOMINAL AND 1.000 INCHES NOMINAL AND 2.000 INCHES NOMINAL AND 3.000 INCHES NOMINAL AND 0.860 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -62.0/+71.0 DEG CELSIUS |
| AHUC | COAXIAL CONNECTOR SERIES DESIGNATION | C SINGLE ANTENNA ELEMENT |
| AHUD | CONNECTOR END DESIGN | SOCKET SINGLE ANTENNA ELEMENT |
| AJCT | ELECTROMAGNETIC POLARIZATION TYPE | VERTICAL SINGLE ANTENNA ELEMENT AND HORIZONTAL SINGLE ANTENNA ELEMENT |
| AJCU | RADIATION PATTERN | OMNIDIRECTIONAL SINGLE ANTENNA ELEMENT |
| AJDD | CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 SINGLE ANTENNA ELEMENT |
| AJDH | BEAM SCANNING METHOD | ROTATING SINGLE ANTENNA ELEMENT |
| AJDJ | POSITIONING DEVICE TYPE | DRIVE MOTOR SINGLE ANTENNA ELEMENT |
| AKRE | VOLTAGE RATING IN VOLTS | 115.0 AC SINGLE ANTENNA ELEMENT AND 25.0 DC SINGLE ANTENNA ELEMENT |
| APGF | DESIGN TYPE | BLADE SINGLE ANTENNA ELEMENT |
| AXGY | MOUNTING METHOD | BRACKET |
| CSCF | TERMINAL TYPE | CONNECTOR, RECEPTACLE SINGLE ANTENNA ELEMENT |
| CTLS | BEAM WIDTH ANGLE | 30.0 DEGREES HORIZONTAL SINGLE ANTENNA ELEMENT AND 30.0 DEGREES VERTICAL SINGLE ANTENNA ELEMENT |
| CTMN | POWER GAIN IN DECIBELS | 0.80 SINGLE ANTENNA ELEMENT |
| FEAT | SPECIAL FEATURES | HELICOILS FOR TWO 8-32 HEADLESS SET SCREWS FOR BREAKING BOND W/AIRCRAFT |
| TEST | TEST DATA DOCUMENT | 85226-DC-50-1 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
All Orders are Fulfilled in the U.S.A.
All shipments must comply with U.S.A export laws.
No exceptions.
The only independent distributor
with a NO CHINA SOURCING Pledge
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We Hope You'll Remember Us for Your One-Stop Shop Needs for Aviation Hardware.
Request for Quote
