Congratulations! We are happy to announce that part number 194D with NSN 3220013728676 is now available in stock. It is listed as Mortiser Hollow Chisel Horizontal with CAGE code 44769 and FSC 3220 Woodworking Machines is manufactured by Oliver Machinery Co. Are you interested in getting a quick quote for this part?
You are just a few steps away from getting the most competitive quote for this part. To request an instant quote, please completely fill out the form. The fields marked with an asterisk (*) are required as the data entered in these fields will help us in getting you the best possible quote. After filling out the Need Parts By and Quantity (ea) fields, click submit. It takes us 15 minutes or less to analyze your requirements and get back with a competitive quote.
Part Number: 194D | Item Name: Mortiser Hollow Chisel Horizontal | NSN: 3220-01-372-8676 (3220013728676) | NIIN : 013728676 |
CAGE Code: 44769 | FSC: FSC 3220 Woodworking Machines | Manufacturer: Oliver Machinery Co | |
Note : We will not share your information to any third parties.
Unlimited Purchasing is owned and operated by ASAP Semiconductor, which is one of the leading supplier of Oliver Machinery Co hard-to-find aircraft and aviation parts. We have huge inventory with more than 10 million national stock numbers from over 26 different federal supply codes. We have parts manufactured by more than 5000 leading manufacturers. Already, we have sold more than 100 million parts.
There is a label on the national stock number (NSN) part, which indicates procurement, storage, stocking, and issuance from the federal supply system. These parts play an important role in the military and defense logistics supply chain.
To know more about this NSN part 194D, please call us at +1-714-705-4780 or send us your Bill of Materials (BOM) via email at sales@unlimitedpurchasing.com.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
3220-01-372-8676 Item Description: Mortiser Hollow Chisel Horizontal | 3220 | 013728676 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | A | 0 | ||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
194d | 5 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AMWX | FEED METHOD | HAND |
ELEC | VOLTAGE IN VOLTS | 115.0 |
FAAZ | PHASE | SINGLE |
AKYN | FURNISHED ITEMS AND QUANTITY | MAGNETIC CONTROL 1; TABLE CLAMP 1 |
ASQQ | HORSEPOWER RATING | 1.00 |
BCRH | SPINDLE QUANTITY | 1 |
BCRQ | MAXIMUM DISTANCE FROM FENCE TO CHISEL CENTER | 4.000 INCHES |
FEAT | SPECIAL FEATURES | TABLE CAN BE LOWERED BY MEANS OF A HANDWHEEL AND SCREW,TO PERMIT MORTISING IN THE EDGE OF STOCK 7 UP TO 20 IN. WIDE WHEN USING THE TABLE. THE TABLE KNEE,WITH THE TABLE ATTACHED,CAN BE REMOVED FROM THE MACHINE IN FIVE MINUTES. WITH THE TABLE REMOVED THE MACHINE WILL MORTISE IN THE END OF STOCK UP TO 32 IN. WIDE. TABLE TRAVEL IS 9 IN. HORIZONTALLY. THE MOTOR HEAD SLIDES ON V-WAYS SCRAPED TO CLOSE TOLERANCES,AFTER ACCURATE PLANING. THE WAYS HAVE GIBS WITH SET SCREWS TO TAKE UP POSSIBLE FUTURE WEAR. THREE SLIDES ARE LOCATED ON THE VERTICAL WAYS. THE MOTOR IS CARRIES ON ONE SLIDE; THE M9OTOR IS EQUIPPED WITH TRUST BALL BEARING TO HANDLE THRUST OF THE BIT; MOTOR IS 3600 RPM |
FREQ | FREQUENCY IN HERTZ | 60.0 |
ATJK | POWER SOURCE | ELECTRIC MOTOR |
ACDC | CURRENT TYPE | AC |
ARDQ | TABLE LENGTH | 28.000 INCHES NOMINAL |
BCRL | MAXIMUM CHISEL SIZE ACCOMMODATED | 0.375 INCHES |
BCRP | MAXIMUM DISTANCE FROM TABLE TO HORIZONTAL CHISEL CENTERLINE | 20.000 INCHES |
We Hope You'll Remember Us for Your One-Stop Shop Needs for Aviation Hardware.
Request for Quote